Press
Release |
||
| Contact:
Lisa Watkins Phone: 800-553-3445 ext. 106 FOR IMMEDIATE RELEASE February 22, 2008 |
15441
Scioto Darby Rd. Mt. Sterling, OH 43143 Phone: 740-869-3377 Fax: 740-869-4374 |
|
OMEGA® TRACER® RELEASES FULL
CRANIAL REMOLDING ORTHOSIS FUNCTIONALITY
OMEGA Tracer, in conjunction with using the OMEGA Scanner, brings orthotists an innovative, new CAD solution for the creation of cranial remolding orthoses. The new cranial functionality is part of OMEGA Tracer version 10.5 which is now available to the international orthotics and prosthetic industry.
To capture the shape of an infant's cranium, a fabric 'cap' is placed on an infant's head. The cap is form fitting but not constricting and allows the infant to move freely. Using the OMEGA Scanner, an orthotist quickly scans an infant's cranium to obtain a digital image of the shape in the CAD software. This process which takes minimal time eliminates the need for casting plaster. Once the shape is electronically captured, the orthotist modifies the shape as desired. The shape may then be sent along with a completed order form to an FDA-approved cranial remolding orthosis fabrication location. The entire process is more patient-friendly and less time-consuming, yet just as accurate, if not more so, than plaster casting. Recently approved as a Class 1 laser device, the OMEGA Scanner is a hand-held, 3D imager that is fully integrated with the OMEGA Tracer software. Exposure to the beam of a Class 1 laser will not result in eye injury and the FDA considers safe for use. This ground-breaking scanning device uses simple reflectors to better accommodate patient movement during shape capture and is accurate to +/- 0.5 mm over the entire surface area. The OMEGA Scanner weighs less than four pounds, making it completely portable with its protective hard-sided, rolling case. |
 |
“Our development effort for the new cranial orthosis functionality in OMEGA Tracer has taken over two years,” stated OMEGA Tracer Director, Mark Ford. “Our development process has included extensive patient testing, multiple revisions of the software to make it more clinician-friendly, and meeting the FDA standards associated with this unique orthotic device. We are proud to bring this complete solution to the orthotics field and greatly appreciate our collaboration with Becker Orthopedic during this process.”
Becker Orthopedic of Troy, Michigan, is the initial OMEGA Partner for the fabrication of cranial remolding orthoses using this CAD/CAM technology. Becker has offered fabrication services for cranial remolding orthosis for over four years.
“We believe that the new cranial functionality within the OMEGA Tracer System truly takes patient care to a new level of professionalism and accuracy,” comments James Campbell, Vice President of Becker. “Both Becker and Ohio Willow Wood have been extremely diligent with their development efforts on this project, and we are confident that we have a proven system in place.”
Ohio Willow Wood, located in Mt. Sterling, Ohio, is an innovative industry leader in the manufacturing and distribution of prosthetic products, including the Alpha® family of liners, the Pathfinder® II foot and the LimbLogic™ Vacuum System. For more information about OMEGA Tracer, to schedule a free, in-facility demonstration, or questions about Ohio Willow Wood and its traditional O&P products, please call 1-800-848-4930 or visit the company’s website at www.owwco.com.
Click here to visit the OMEGA Cranial Remolding Orthosis webpage.
| © 2007 Ohio Willow Wood |  United
States |
 Germany
|
 Netherlands
|
 Sweden
|
| Privacy Policy Sitemap |
